RAM 1500 Truck 2WD V6-3.9L VIN X (1999)
2.
Clean the side plate area by the trailer hitch mounting nuts (Figure 1).
3.
Inspect the right and left trailer hitch side plates for cracks as shown in Figure 1.
^
Trucks with NO cracks on either side of the trailer hitch assembly must have reinforcement brackets installed. Continue with Section "B -
Install Trailer Hitch Reinforcement Brackets."
^
Trucks with cracks on either side of the trailer hitch assembly must have the trailer hitch assembly replaced. Continue with Section "C -
Replace the Trailer Hitch Assembly (P/N CBCB8722)." If P/N. CBCB8722 is not available, continue with Section "D - Replace the Trailer.
Hitch Assembly (Mopar 82205979)."
B: Install Trailer Hitch Reinforcement Brackets
1.
Measure and scribe a line on the right side lower frame rail flange 1-3/8 inches (35mm) back from the rear edge of the trailer hitch flange (Figure
2).