RAM 1500 Truck 2WD V6-3.9L VIN X (1999)
Caliper And Steering Knuckle Slide Surfaces
1. Clean caliper and steering knuckle slide surfaces with wire brush. Then apply light coat of Mopar multi-mileage grease to slide surfaces.
2. Lubricate caliper mounting bolts, collars, bushings and bores with silicone grease as follows:
Mounting Bolt Lubrication (75mm Caliper)
^
1/2 ton models with 75 mm caliper, apply silicone grease to mounting pins and collars. Then fill space between bushings in caliper.
