RAM 1500 Truck 2WD V6-3.9L VIN X (1999)
Hydraulic Control Assembly - Antilock Brakes: Service and Repair
REMOVAL
RWAL Valve Harness Connector
1. Remove RWAL valve harness connector from the RWAL controller.
2. Remove the brake lines from the valve.
RWAL Valve
3. Remove the valve mounting bolt and remove the valve from the bracket.
INSTALLATION
1. Position the valve on the bracket and install the mounting bolt. Tighten the mounting bolt to 20 - 27 Nm (180 - 240 inch lbs.).
2. Install the brake lines and tighten to 19 - 23 Nm (170 - 200 inch lbs.).
3. Install the RWAL valve harness connector into the RWAL controller.
4. Bleed the RWAL brake system.
