RAM 1500 Truck 2WD V6-3.9L VIN X (1999)
8.
Install the bolt and torque it to 312 Nm (230 ft. lbs.).
NOTE:
USE A BAR TO LOCK THE PULLEY IN PLACE WHILE TIGHTENING.
9.
Install a new accessory drive belt following service manual procedures.
10.
Reinstall the radiator following service manual procedures.
11.
Reinstall the negative battery cable.
12.
Fill the cooling system with the saved coolant and operate the vehicle to purge air from the system. Top off the automatic transmission fluid (if
required).
POLICY: Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
Labor Operation No:
09-25-25-90
1.5 Hrs.
FAILURE CODE: P8 - New Part
