RAM 1500 Truck 2WD V6-3.9L VIN X (1999)
REPAIR PROCEDURE:
1.
Raise the vehicle on a suitable hoist.
2.
Remove the engine oil filter.
5.
Remove the oil filter connector, adapter plate, and adapter plate gasket.
6.
Clean all adapter plate gasket surfaces.
7.
Install the new oil filter adapter plate gasket (p/n 53020461AB), adapter plate, and retaining connector. Tighten the connector to 68 Nm (50 ft.
lbs.).
8.
Install a new oil filter (p/n 05281090).
9.
Lower vehicle and start the engine.
10.
Stop the engine and add additional engine oil as required.
11.
On the left engine valve cover, place a dot of white paint immediately above the Engine Bar Code Label.
POLICY: Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
Labor Operation No:
09-55-05-93
0.3 Hrs.
FAILURE CODE: P8 - New Part
