RAM 1500 Truck 2WD V6-3.9L VIN X (1999)
Shaft Protector And Puller
5. Install the lip of the rotor puller (Special Tool C-6141-1 in Kit 6460) into the snap ring groove exposed in Step 6, and install the shaft protector
(Special Tool C-6141-2 in Kit 6460).
Install Puller Plate
6. Install the puller through-bolts (Special Tool C-6461) through the puller flange and into the jaws of the rotor puller and tighten. Then the puller
center bolt clockwise until the rotor pulley is free.