RAM 1500 Truck 2WD V6-3.9L VIN X (1999)
Evaporator Core: Service and Repair
WARNING: ON VEHICLES EQUIPPED WITH AIRBAGS, REFER TO AIR BAGS AND SEAT BELTS/AIR BAGS BEFORE
ATTEMPTING ANY STEERING WHEEL, STEERING COLUMN, OR INSTRUMENT PANEL COMPONENT DIAGNOSIS OR SERVICE.
FAILURE TO TAKE THE PROPER PRECAUTIONS COULD RESULT IN ACCIDENTAL AIRBAG DEPLOYMENT AND POSSIBLE
PERSONAL INJURY.
REMOVAL
1. Remove the heater-A/C housing from the vehicle, and disassemble the housing halves. Refer to: Heating and Air Conditioning, Housing
Assembly HVAC, Service and Repair, See: Housing Assembly HVAC/Service and Repair
Evaporator Coil Location In Heater - A/C Housing (Upside Down)
2. Lift the evaporator coil out of the heater-A/C housing.
INSTALLATION
1. Insert the evaporator coil into the bottom of the heater-A/C housing.
2. Reassemble and reinstall the heater-A/C housing in the vehicle. Refer to: Heating and Air Conditioning, Housing Assembly HVAC, Service
and Repair, See: Housing Assembly HVAC/Service and Repair
NOTE: If the evaporator is replaced, add 60 millimeters (2 fluid ounces) of refrigerant oil to the refrigerant system.
