RAM 1500 Truck 2WD V6-3.9L VIN X (1999)
Technical Service Bulletin # 23-18-99
Date: 990521
Seat Belt Retractor Cover - Bezel Comes Loose
NUMBER: 23-18-99
GROUP: Body
DATE: May 21, 1999
SUBJECT:
Bezel Came Loose From Seat Belt Retractor Cover
OVERVIEW:
This bulletin involves installing a new seat belt retractor cover.
MODELS:
1998 - 1999 (BR/BE) Ram Truck
NOTE:
THIS BULLETIN APPLIES TO CLUB/QUAD CAB VEHICLES.
SYMPTOM/CONDITION:
The seat belt retractor cover bezel comes loose due to a cracked seat belt retractor cover.
The crack may occur at the bottom of the opening where the seat belt bezel snaps into the cover.
DIAGNOSIS:
Inspect the seat belt retractor cover for cracks or other damage. If the seat belt cover is cracked or damage, perform the Repair Procedure
PARTS REQUIRED:
AR (1) 05015932AA Cover, Seat Belt Retractor, Right Side
AR (1) 05015933AA Cover, Seat Belt Retractor, Left Side
POLICY: Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
Labor Operation No:
23-13-02-92
Replace Seat Belt Retractor
Cover - One - Right Or Left Side
0.8 Hrs.
FAILURE CODE: P8 - New Part
Repair Procedure
THIS REPAIR IS COMPATIBLE WITH DAIMLERCHRYSLER'S MOBILE SERVICE PROGRAM AND DOES NOT REQUIRE HOISTS OR
OTHER FULL SERVICE FACILITY SPECIAL EQUIPMENT.
1.
Remove seat back recliner handle.
2.
Remove dump handle, if equipped.
3.
Remove side shield.
4.
Remove the nut attaching the seat belt anchor to the seat track adjuster.
5.
Remove the assist handle on the backside of the seat, if equipped.
