RAM 1500 Truck 2WD V6-3.9L VIN X (1999)
3. Install key cylinder into ignition switch by aligning retaining pin into retaining pin slot. Push key cylinder into switch until retaining pin engages.
After pin engages, rotate key to OFF or LOCK position.
4. Check for proper retention of key cylinder by attempting to pull cylinder from switch.
Ignition Switch View From Column
Park Lock Linkage - Automatic Transmission - Typical
5. Automatic Transmission Only: Before attaching ignition switch to steering column, the transmission shifter must be in PARK position. The park
lock dowel pin on rear of ignition switch must also be properly indexed into the park lock linkage before installing switch.
Steering Wheel Lock Lever
