RAM 1500 Truck 2WD V6-3.9L VIN X (1999)
Oil Location
-
Place two drops of oil to the interface of the nut/washer before installing on the wheel stud.
NOTE: Do not use more then two drops of oil on the nut/washer, since the center caps attach in this area.
-
Tighten the wheel lug nuts in the numbered sequential pattern until they are snug tight. Then tighten lug nut to specified torque following same
number sequence.
-
Tighten lug nuts in same numbered sequence a second time to the specified torque. This will ensure that the wheels are thoroughly mated.
-
Check lug nut specified torque after 100 miles (160 kilometers). Also after 500 miles (800 kilometers) of vehicle operation.
NOTE: Wheel lug nuts should be tightened to specified torque at every maintenance interval thereafter.
