RAM 1500 Truck 2WD V6-3.9L VIN X (1999)
Seals and Gaskets: Service and Repair
Rear Axle - 9 1/4 Heavy Duty
REMOVAL
1. Remove axle shaft.
Axle Seal Removal
2. Remove axle shaft seal from the end of the axle tube with a small pry bar.
Axle Shaft Bearing Removal Tool
3. Remove the axle shaft bearing from the axle tube with Bearing Removal Tool C-4828.
INSTALLATION
NOTE: Do not install the original axle shaft seal. Always install a new seal.
1. Wipe the axle tube bore clean. Remove any old sealer or burrs from the tube.
Axle Shaft Seal And Bearing Installation
