RAM 1500 Truck 2WD V8-4.7L (2008)
1. Install the seat back cover and connect the zip strip.
2. Install the headrest sleeves. See: Head Rest/Service and Repair/Headrest Sleeve - Installation
3. Install the seat back. See: Seat Back - Installation
Rear - Mega Cab
INSTALLATION
1. Place cover over the foam and install onto the seat pan.
2. Connect the J-straps to the pan.
3. Install the release/recliner handle.
4. Install the cushion assembly onto the seat assembly.
5. Install the lower cushion pivot bolts.
6. Install the upper cushion pivot bolts.
7. Install the cables at the cushion using the marks made during removal.
8. Install the seat back onto the seat and install the four bolts.
9. Connect the lower cable attachment for the seat back release.
10. Install the lower anchor for the center seat belt.
11. Install the hinge covers.
12. Connect the J-straps at the bottom of the seat back being worked on.
13. Install the filler panels.