RAM 1500 Truck 2WD V8-4.7L (2008)
5. Install the banjo bolt (4) with new copper washers to the caliper (6). Tighten to 28 Nm (250 in. lbs.)
6. Install the caliper slide pin bolts (2). Tighten to 32 Nm (24 ft. lbs.)
7. Bleed the base brake system, See: Brake Bleeding .
8. Install the tire and wheel assembly, See: Maintenance/Wheels and Tires/Service and Repair/Removal and Replacement .
9. Lower the vehicle.
Front - 2500 & 3500
FRONT - 2500 & 3500
NOTE: Install a new copper washers on the banjo bolt when installing
1. Install the disc brake caliper.
CAUTION: Verify brake hose is not twisted or kinked before tightening fitting bolt.
2. Install the banjo bolt with new copper washers to the caliper. Tighten to 27 Nm (20 ft. lbs.)
3. Install the caliper slide pin bolts. tighten to 32 Nm (24 ft. lbs.)
4. Bleed the base brake system, See: Brake Bleeding .
5. Install the tire and wheel assembly, See: Maintenance/Wheels and Tires/Service and Repair/Removal and Replacement .
6. Lower the vehicle.
Front - 4500 & 5500
FRONT - 4500 & 5500
NOTE: Install a new copper washers on the banjo bolt when installing
1. Install the disc brake caliper (2).
CAUTION: Verify brake hose is not twisted or kinked before tightening fitting bolt.
2. Install the banjo bolt (4) with new copper washers to the caliper. Tighten to 27 Nm (20 ft. lbs.)
3. Install the caliper slide pin bolts (1). tighten to 32 Nm (24 ft. lbs.)
4. Bleed the base brake system, See: Brake Bleeding .
5. Install the tire and wheel assembly, See: Maintenance/Wheels and Tires/Service and Repair/Removal and Replacement .