RAM 1500 Truck 2WD V8-4.7L (2008)
Power Window Switch: Service and Repair
Removal
REMOVAL
FRONT PASSENGER
1. Disconnect and isolate the battery negative cable.
2. Remove the door trim panel. See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair/Front Door
Trim Panel - Removal
3. Remove the switch from the trim panel bezel.
REAR PASSENGER
1. Disconnect and isolate the battery negative cable.
2. Remove the door trim panel. See: Body and Frame/Doors, Hood and Trunk/Doors/Rear Door/Rear Door Panel/Service and Repair/Rear Door
Trim Panel - Removal
3. Gently pry switch from door trim panel.