RAM 1500 Truck 2WD V8-4.7L (2008)
NOTE: After adding any fluid to the transmission, wait a minimum of 2 minutes for the oil to fully drain from the fill tube into the
transmission before rechecking the fluid level.
10. Check transmission for leaks.
Fluid And Filter Replacement
FLUID AND FILTER REPLACEMENT
REMOVAL
DRAIN PLUG
1. Raise vehicle.
2. Place a large diameter drain pan beneath the transmission pan.
3. Remove the drain plug bolt (1) and allow the oil to drain from the transmission pan.
4. Remove the drain pan bolts from the transmission case.
5. Remove the drain pan.
TRANSMISSION OIL FILTER