RAM 1500 Truck 2WD V8-4.7L (2008)
3. Reconnect the left headlamp and dash wire harness (1) connector to the washer pump/motor unit connector receptacle (3).
4. Reconnect the left headlamp and dash wire harness connector (5) to the washer fluid level switch connector receptacle (4).
5. Reconnect the reservoir washer hose to the barbed nipple of the inline fitting at the engine compartment washer hose in the right headlamp and
dash wire harness.
6. Engage the reservoir washer hose into the integral routing clips on the top of the radiator fan shroud.
7. Reconnect the coolant overflow hose to the nipple on the radiator filler neck. See: Engine, Cooling and Exhaust/Cooling System/Coolant
Reservoir/Service and Repair/Coolant Recovery Container - Installation .
8. Refill the washer reservoir (2) with the washer fluid drained from the reservoir during the removal procedure.
9. Reconnect the battery negative cable.
10. Check and adjust the coolant level in the coolant overflow bottle as necessary. See: Engine, Cooling and Exhaust/Cooling System/Service and
Repair .