RAM 1500 Truck 2WD V8-4.7L VIN N (2002)
Coolant Reservoir: Service and Repair
COOLANT DEGAS CONTAINER
REMOVAL
1. Drain enough coolant from the system so that the degas container is empty.
2. Loosen the clamps securing the supply and return hoses to the container and remove the hoses.
3. Remove the coolant container to fan shroud mounting bolts.
4. Tilt the container back towards the engine to disengage the mounting pin locking features and lift the container away from the fan shroud.
INSTALLATION
1. Align the mounting pins into the slots on the fan shroud and push the container into the fan shroud.
2. Secure the coolant container to the fan shroud with bolts. Tighten to 8.5 Nm (75 inch lbs.).
NOTE: Ensure the locking feature on the mounting pins has engaged.
3. Connect the supply and return hoses to the container and ensure that the hose clamps are positioned properly.
4. Refill the cooling system.
