RAM 1500 Truck 2WD V8-4.7L VIN N (2002)
4. Remove coil mounting nut from mounting stud.
5. Carefully pull up coil from cylinder head opening with a slight twisting action.
6. Remove coil from vehicle.
INSTALLATION
1. Using compressed air, blow out any dirt or contaminants from around top of spark plug.
2. Check condition of coil O-ring and replace as necessary. To aid in coil installation, apply silicone to coil O-ring.
3. Position ignition coil into cylinder head opening and push onto spark plug. Do this while guiding coil base over mounting stud.
4. Install coil mounting stud nut. Refer to torque specifications.
5. Connect electrical connector to coil by snapping into position.
6. If necessary install throttle body air tube or box.
