RAM 1500 Truck 2WD V8-5.2L VIN Y (1997)
Power Door Lock Actuator: Service and Repair
REMOVAL
1. Raise the door window to its full up position.
2. Disconnect and isolate the battery negative cable.
3. Remove the power lock switch.
Power Mirror Switch Knob Remove/Install
4. On the driver side only, if equipped with power mirrors, pull the power mirror switch control knob rearward to remove it from the switch stem.
Power Mirror Switch Nut
5. Remove the nut that secures the power mirror switch to the door trim panel.
6. Using a wide flat-bladed tool such as a trim stick, gently pry the trim panel away from the door around the perimeter to release the retainers and
remove the trim panel.
NOTE: To aid in the removal of the trim panel, start at the bottom of the panel.