RAM 1500 Truck 2WD V8-5.2L VIN Y (1997)
7. Remove the four screws that secure the seat adjuster and motors assembly to the seat cushion frame and remove the adjuster and motors assembly
from the seat.
8. Reverse the removal procedures to install. Tighten the seat mounting hardware as follows:
-
Seat adjuster to seat cushion frame screws - 25 N.m (18 ft. lbs.)
-
Front seat adjuster to floor panel screws - 29 N.m (250 in. lbs.)
-
Rear seat adjuster to outer floor panel stud nut - 29 N.m (250 in. lbs.)
-
Rear seat adjuster to inner floor panel stud nut - 41 N.m (30 ft. lbs.)
-
Center seat bolts - 25 N.m (18 ft. lbs.).