RAM 1500 Truck 2WD V8-5.2L VIN Y (1997)
Cruise Control Servo: Service and Repair
REMOVAL
1. Disconnect negative battery cable at battery.
Speed Control Servo Location
2. Disconnect electrical connector at servo.
3. Disconnect vacuum hose at servo.
4. Remove 2 nuts holding servo cable sleeve to servo mounting bracket.
5. Block throttle to full open position.
Speed Control Cable
6. Pull speed control cable sleeve away from servo to expose cable hairpin clip.
7. Remove hairpin clip attaching cable to servo.
8. Remove servo from mounting bracket.
