dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Drivetrain - Add Additional Rear Differential Fluid|Page 87 > < Fluid - A/T|Capacity Specifications|Page 78
Page 1
background image

Fluid - Differential: Customer Interest
Drivetrain - Add Additional Rear Differential Fluid

NUMBER: 03-001-10

GROUP: Differential & Driveline

DATE: December 21, 2010

THIS SERVICE BULLETIN IS ALSO BEING RELEASED AS RAPID RESPONSE TRANSMITTAL 10-080. ALL APPLICABLE SOLD AND
UN-SOLD VIN's HAVE BEEN LOADED. TO VERIFY THAT THIS SERVICE ACTION IS APPLICABLE TO THE UN-SOLD VEHICLE, USE
VIP OR PERFORM A VIN SEARCH IN TECHCONNECT. ALL REPAIRS ARE REIMBURSABLE WITHIN THE PROVISIONS OF WARRANTY.

SUBJECT:
Additional Rear Axle Fluid Needed

OVERVIEW:
This bulletin involves adding an additional 19 fluid oz. of rear axle lube and a 1 fluid oz. of friction modifier to the rear differential.

MODELS:

2011

(DS)

RAM 1500 Pick-up

2011

(DX)

RAM TRUCK (Mexico)

NOTE:

This Service Bulletin applies to vehicles equipped with a 3.55 rear axle or a 3.92 rear axle (Sales Code DMD or DMH) built before December 11,
2010 (MDH 1211XX).

DISCUSSION:
This Service Bulletin is being released as a preventative countermeasure to address an axle durability condition.

DIAGNOSIS:
If the above condition is present, perform the Repair Procedure.

PARTS REQUIRED:

REPAIR PROCEDURE:

1. Raise vehicle on hoist.

NOTE:

A frame hoist is recommended to allow adequate clearance to fill axle through the vent hole.

Drivetrain - Add Additional Rear Differential Fluid|Page 87 > < Fluid - A/T|Capacity Specifications|Page 78