RAM 1500 Truck 2WD V8-5.7L VIN 2 (2006)
Pedal Positioning Switch: Service and Repair
SWITCH-ADJUSTABLE PEDALS
REMOVAL
1. Remove the lower drivers side bezel (4).
2. Disconnect the electrical connector (3) from the adjustable pedal switch (2).
3. Remove the switch (2) from the lower drivers side bezel (4) by squeezing the retaining clips together and pushing the switch outwards.
INSTALLATION
1. Install the switch (2) to the lower drivers side bezel (4) by pushing the switch inwards seating the retaining clips to the lower drivers side bezel (4).
2. Reconnect the electrical connector (3) to the adjustable pedal switch (2).
3. Install the lower drivers side bezel (4).