RAM 1500 Truck 2WD V8-5.7L VIN 2 (2006)
Seat Heater Switch: Service and Repair
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the instrument panel center bezel.
3. Disconnect the switch/module electrical connectors.
4. Using an appropriate flat bladed tool, remove the heated seat switch/module from the bezel.
INSTALLATION
1. Align the tabs of the switch/module to the instrument panel center bezel and gently push together until the tabs are securely in place.
2. Connect the switch/module electrical connectors.
3. Install the instrument panel center bezel.
4. Connect the battery negative cable.
5. Verify heated seat system operation.