RAM 1500 Truck 2WD V8-5.7L VIN 2 (2006)
5. Remove the inboard (4) and outboard (2) brake pads.
6. Remove the caliper adapter mounting bolts (5).
7. Remove the caliper slide pins from the adapter.
INSTALLATION
NOTE: Petroleum based grease should not be used on any of the rubber components of the caliper, Use only a Non-Petroleum based grease, such as
Dow Corning-8079 grease.
NOTE: Clean slide pin bores thoroughly to remove any old grease.
NOTE: Use grease packets included with kit or Dow Corning-807 grease.
1. Thoroughly coat the new slide pins (3) on all working surfaces.
