RAM 1500 Truck 2WD V8-5.7L VIN 2 (2006)
1. Carefully install the heater core (3) into the front of the HVAC housing.
2. Position the heater core tube bracket (2) onto the HVAC housing.
3. Install the two screws (1) that secures the heater core bracket to the HVAC housing. Tighten the screws to 2.2 N.m (20 in. lbs.).
4. If equipped with the dual zone heating-A/C system, install the linkage rod (4).
5. Install the foam seal onto the heater core tubes.
NOTE: If the heater core is being replaced, flush the cooling system.
6. Install the HVAC housing.
