RAM 1500 Truck 2WD V8-5.7L VIN 2 (2006)
Drive Belt: Testing and Inspection
BELT-DRIVE
DIAGNOSIS AND TESTING ACCESSORY DRIVE BELT VISUAL DIAGNOSIS
NOTE: 5.9L Diesel Engine - If a belt is broken or frayed, inspect engine speed sensor (located near the crankshaft damper) for damage.
When diagnosing serpentine accessory drive belts, small cracks that run across the ribbed surface of the belt from rib to rib, are considered normal.
These are not a reason to replace the belt. However, cracks running along a rib (not across) are not normal. Any belt with cracks running along a rib
must be replaced. Also replace the belt if it has excessive wear, frayed cords or severe glazing.
NOISE DIAGNOSIS
Noises generated by the accessory drive belt are most noticeable at idle. Before replacing a belt to resolve a noise condition, inspect all of the
accessory drive pulleys for alignment, glazing, or excessive end play.
ACCESSORY DRIVE BELT DIAGNOSIS CHART (part 1)
