RAM 1500 Truck 2WD V8-5.7L VIN 2 (2006)
gain access to the Heater A/C assembly. It is not necessary to completely remove the instrument panel
2.
Remove the mode (defrost) actuator (Fig. 1).
3.
Remove the white plastic rear seat heat duct lever from the mode actuator and discard it.
4.
Install the new lever, p/n 05189140AA, onto the actuator (Fig. 1).
5.
Install the mode actuator on to the heater A/C assembly
6.
Install the instrument pane and steering column.
POLICY:
Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
FAILURE CODE:
Disclaimer:
This bulletin is supplied as technical information only and is not an authorization for repair.
