RAM 1500 Truck 2WD V8-5.7L VIN 2 (2006)
12. Remove the three screws (1) that secure the panel/floor door assembly (2) to the top of the HVAC housing (3) and remove the door assembly.
13. To remove the panel/floor-air doors (1) from the panel/floor door plate (2), first carefully release the retaining tabs of actuator coupler (3) located
on the inside surface of the door plate and pull the actuator coupler out of the pivot shaft of the panel/floor-air doors.
NOTE: If the seals on the air doors is deformed or damaged, the air doors must be replaced.
14. Remove the panel/floor-air doors from the panel/floor door plate.
NOTE: If the foam seal for the heater core tubes is deformed or damaged, the seal must be replaced.
