RAM 1500 Truck 2WD V8-5.7L VIN 2 (2006)
Clearance Lamp Bulb: Service and Repair
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the cab clearance lamp (1) from the roof panel.
3. Pull the base of the bulb (3) straight out of the socket (2).
INSTALLATION
CAUTION: Always use the correct bulb size and type for replacement. An incorrect bulb size or type may overheat and cause damage to the lamp, the
socket and/or the lamp wiring.
1. Align the base of the bulb (3) with the socket (2).
2. Push the bulb straight into the socket until the base is firmly seated.
3. Reinstall the cab clearance lamp (1) onto the roof panel.
4. Reconnect the battery negative cable.