RAM 1500 Truck 2WD V8-5.7L VIN 2 (2006)
3. Install screw to hold the primary oil filter (1) to valve body. Tighten screw to 4.5 Nm (40 inch lbs.) torque.
4. Install new cooler return filter (2) onto the transmission, if necessary. Torque the filter to 9.5 Nm (7 ft. lbs.).
5. Place bead of Mopar RTV sealant onto the transmission case sealing surface.
6. Place pan in position on transmission.
7. Install bolts to hold pan to transmission. Tighten bolts to 12 Nm (105 inch lbs.) torque.
8. Lower vehicle and fill transmission with MOPAR ATF +4.
