RAM 1500 Truck 2WD V8-5.7L VIN 2 (2006)
Power Interrupt Connector/Switch: Description and Operation
IOD FUSE
All vehicles are equipped with an Ignition-Off Draw (IOD) fuse (1) that is disconnected within the Integrated Power Module (IPM) when the vehicle is
shipped from the factory. Dealer personnel are to reconnect the IOD fuse in the IPM as part of the preparation procedures performed just prior to new
vehicle delivery.
A laser printed fuse layout map is integral to the IPM cover to ensure proper fuse identification. The IOD fuse (1) is a 20 ampere mini blade-type fuse,
located in fuse cavity # 51. The fuse is secured within a black molded plastic fuse holder and puller unit that serves both as a tool for disconnecting and
reconnecting the fuse in the IPM cavity, and as a fuse holder that conveniently stores the fuse in the same cavity after it has been disconnected.
CIRCUITS INCLUDED WITH IOD FUSE
-
Cluster (CCN)
-
Diagnostic Connector
-
Map Lamps
-
Glove Box Lamp
-
Courtesy Lamps Radio
-
Underhood Lamp
The term Ignition-Off Draw (IOD) identifies a normal condition where power is being drained from the battery with the ignition switch in the Off
position. The IOD fuse feeds the memory and sleep mode functions for some of the electronic modules in the vehicle as well as various other accessories
that require battery current when the ignition switch is in the Off position. The only reason the IOD fuse is disconnected is to reduce the normal IOD of
the vehicle electrical system during new vehicle transportation and pre-delivery storage to reduce battery depletion, while still allowing vehicle operation
so that the vehicle can be loaded, unloaded and moved as needed by both vehicle transportation company and dealer personnel.
The IOD fuse is disconnected from Integrated Power Module (IPM) fuse cavity # 51 when the vehicle is shipped from the assembly plant. Dealer
personnel must reconnect the IOD fuse when the vehicle is being prepared for delivery in order to restore full electrical system operation. Once the
vehicle is prepared for delivery, the IOD function of this fuse becomes transparent and the fuse that has been assigned the IOD designation becomes only
another Fused B(+) circuit fuse.
The IOD fuse can be used by the vehicle owner as a convenient means of reducing battery depletion when a vehicle is to be stored for periods not to
exceed about thirty days. However, it must be remembered that disconnecting the IOD fuse will not eliminate IOD, but only reduce this normal
condition. If a vehicle will be stored for more than about thirty days, the battery negative cable should be disconnected to eliminate normal IOD; and, the
battery should be tested and recharged at regular intervals during the vehicle storage period to prevent the battery from becoming discharged or
damaged.
