RAM 1500 Truck 2WD V8-5.7L VIN 2 (2006)
1. Position the rear center seat belt and retractor unit into the 60 percent section of the rear seat back frame (3). Be certain the tab (5) on the retractor
bracket is engaged in the slot in the frame.
2. Install and tighten the screw (4) that secures the rear center seat belt retractor to the seat back frame. Tighten the screw to 60 N.m (44 ft. lbs.).
3. Position the belt bracket (1) of the rear center seat belt onto the top of the seat back frame. Be certain the tab (2) on the bracket is engaged in the
slot in the frame.
4. Install and tighten the two screws (6) that secure the belt bracket of the rear center seat belt to the seat back frame. Tighten the screws to 60 N.m
(44 ft. lbs.).
5. Reinstall the trim cover onto the 60 percent section of the rear seat back frame.
6. Engage the rear center seat belt bezel (2) over the webbing of the rear center seat belt.
7. Position the bezel over the belt bracket on the top of the rear seat back (1).
8. Install and tighten the two screws (3) that secure the bezel to the belt bracket on the top of the rear seat back frame. Tighten the screws to 5 N.m
(44 in. lbs.).
