RAM 1500 Truck 2WD V8-5.7L VIN 2 (2006)
Clutch Switch: Testing and Inspection
CLUTCH PEDAL POSITION SWITCH
1. Disconnect switch 2-wire connector (2) attached to pedal support bracket (1), under instrument panel to left of clutch pedal.
2. Check switch continuity with an ohmmeter while operating clutch pedal.
-
Pedal Depressed - Continuity
-
Pedal Released - No Continuity
3. If continuity is not present or always present, replace clutch master cylinder. Switch is not serviced separately.
