RAM 1500 Truck 2WD V8-5.7L VIN 2 (2006)
Power Steering Line/Hose: Service and Repair
Return Hose - Reservoir to Cooler
RETURN HOSE-RESERVOIR TO COOLER
REMOVAL
1. Drain and siphon the power steering system.
2. Disconnect the return hose at the reservoir.
3. Raise and support the vehicle.
4. Remove the return hose from the routing clamp at the fan shroud.
5. Disconnect the return hose at the cooler.
6. Remove the hose from the vehicle.
INSTALLATION
1. Install the return hose to the vehicle.
2. Reconnect the return hose at the cooler.
3. Reattach the hose to the routing clip at the fan shroud.
4. Remove the support and lower the vehicle.
5. Reconnect the return hose at the reservoir.
6. Refill the power steering system.
