RAM 1500 Truck 2WD V8-5.7L VIN 2 (2006)
4. Tighten the spring front and rear eye pivot bolt snug, Do not torque.
5. Install the spring clamp bolts (5), plate (2) and the retaining nuts (3).
6. Remove the holding fixture for the rear axle.
7. Remove the supports and lower the vehicle so that the weight is being supported by the tires.
8. Tighten the spring clamp retaining nuts (3) to 149 Nm (110 ft. lbs.).
9. Tighten the spring front and rear pivot bolt nuts to 163 Nm (120 ft. lbs.) (LD) or 230 Nm (170 ft. lbs.) (HD).
