RAM 1500 Truck 2WD V8-5.7L VIN 2 (2006)
5. Tighten Remove 6310 nut (1) to pull bearing into the receiver (3).
INSTALLATION
1. Remove any old sealer/burrs from axle tube.
2. Install axle shaft bearing with Installer 9344 (1) and Handle C4171 (2). Drive bearing in until tool contacts the axle tube.
NOTE: Bearing is installed with the bearing part number against the installer.
3. Coat new axle seal lip with axle lubricant and install with Installer 9343 and Handle C4171.
4. Install axle shaft.
