RAM 1500 Truck 2WD V8-5.7L VIN 2 (2006)
Transmission Position Switch/Sensor: Service and Repair
45RFE/545RFE Automatic Transmission
ASSEMBLY-TRANSMISSION SOLENOID/TRS
REMOVAL
NOTE: If the Transmission Solenoid/TRS Assembly is being replaced, the Quick Learn Procedure must be performed.
1. Remove the valve body from the transmission.
2. Remove the bolts (1) holding the transmission solenoid/TRS assembly onto the valve body.
3. Separate the transmission solenoid/TRS assembly from the valve body.
INSTALLATION
1. Place TRS selector plate in the PARK position.
2. Position the transmission solenoid/TRS assembly onto the valve body Be sure that both alignment dowels are fully seated in the valve body and
that the TRS switch contacts are properly positioned in the selector plate
