RAM 1500 Truck 2WD V8-5.7L VIN 2 (2006)
Back Window Regulator: Service and Repair
BACKLITE VENT GLASS-REGULATOR
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the rear seats.
3. Remove the rear cab back panel, Refer to Trim Panel.
4. Remove the two mounting bolts (1).
5. Disconnect the electrical connector to the power motor.
6. Separate the cable housings from the glass track (1).
7. Disconnect the cable ends from the vent glass (2).
8. Separate the support clips (5) and remove the regulator assembly (3).
INSTALLATION