RAM 1500 Truck 2WD V8-5.7L VIN D (2003)
Cabin Ventilation Grille: Service and Repair
BODY VENT
REMOVAL
1. Remove the rear cab trim panel, Refer to Trim Panel.
2. Disengage the retaining tabs (1) that secure the body vent (3) to the cab back panel (2).
3. Remove the vent through the opening in the cab back panel.
INSTALLATION
1. Position the body vent (3) into the opening of the cab back panel (2).
2. Install the body vent into the cab back panel and fully engage the retaining tabs (1).
3. Install the rear cab trim panel.