RAM 1500 Truck 2WD V8-5.7L VIN D (2003)
Ignition Coil: Service and Repair
Ignition Coil Capacitor Replacement
REMOVAL
The coil capacitor is located in the right-rear section of the engine compartment. It is attached with a mounting stud and nut.
Fig. 32 Capacitor Location
1. Disconnect electrical connector at capacitor.
2. Remove mounting nut and remove ground strap.
3. Remove capacitor.
INSTALLATION
1. Position capacitor to mounting stud.
2. Position ground strap to mounting stud.
3. Tighten nut to 7 Nm (60 in. lbs.) torque.
4. Connect electrical connector to coil capacitor.
