RAM 1500 Truck 2WD V8-5.7L VIN D (2003)
Power Window Switch: Service and Repair
REMOVAL
Front Passenger
1. Disconnect and isolate the battery negative cable.
2. Using a trim stick, gently pry the switch from the door trim panel.
3. Disconnect the electrical harness connector from the window switch.
Rear Passenger
1. Disconnect and isolate the battery negative cable.
2. Remove the door trim panel.
3. Gently pry switch from door trim panel.
INSTALLATION
Front Passenger
1. Connect electrical harness connector to switch.
2. Position switch to door trim panel.
3. Connect battery negative cable.
Rear Passenger
1. Install switch to door trim panel.
2. Install door trim panel.
3. Connect battery negative cable.