RAM 1500 Truck 2WD V8-5.9L VIN Z LDC (1999)
Coolant Reservoir: Service and Repair
TANK REMOVAL-ALL EXCEPT 8.OL V-10 ENGINE
1. Remove overflow hose from radiator.
Coolant Reserve/Overflow Tank - All Except 8.0L V-10 Engine
2. Unsnap the coolant reserve/overflow tank from fan shroud. Lift straight up. The fan shroud is equipped with T-shaped slots to attach the tank. An
alignment pin is located on the side of tank.
INSTALLATION
1. Snap the tank into the two T-slots and the alignment pin on fan shroud.
2. Connect overflow hose to radiator.
TANK REMOVAL-8.OL V-10 ENGINE
1. Remove overflow hose from radiator.
Coolant Reserve/Overflow Tank - V-10 Engine
2. Remove three tank mounting bolts and remove tank.
INSTALLATION
1. Position tank to inner fender.
2. Install bolts and tighten to 6 Nm (50 inch lbs.) torque.
3. Connect overflow hose to radiator.