RAM 1500 Truck 2WD V8-5.9L VIN Z LDC (1999)
Headlamp Bulb: Service and Repair
Headlamp Bulb
On driver side and on vehicles with dual batteries, the headlamp assembly must be removed to service the headlamp bulb.
REMOVAL
1. Release hood latch and open hood.
2. To remove headlamp assembly on drivers side or passenger side when equipped with dual batteries, refer to Headlamp Removal.
3. Disengage wire connector from headlamp bulb(s).
4. Remove retaining ring holding bulb(s) to headlamp.
5. Pull bulb(s) from headlamp.
CAUTION: Do not touch the bulb glass with fingers or other oily surfaces. Reduced bulb life will result.
INSTALLATION
1. Position bulb(s) in headlamp.
2. Install retaining ring holding bulb(s) to headlamp.
3. Connect wire connector to headlamp bulb(s).