RAM 1500 Truck 2WD V8-5.9L VIN Z LDC (1999)
Windshield Washer Spray Nozzle: Description and Operation
SYSTEM OPERATION
Pressurized washer fluid is fed through a single hose, attached to a barbed nipple on the washer pump. The hose is routed along the left inner
fender shield to an in-line fitting near the dash panel.
A second hose is routed from the in-line fitting through a grommet inserted in a hole in the cowl plenum panel to a Y fitting located in the cowl
plenum area, beneath the cowl plenum cover/grille panel. Hoses from the Y fitting in the cowl plenum are routed through clips molded to the
underside of the cowl plenum cover/grille panel to the two washer nozzles. The washer nozzles are snap-fit into openings in the cowl plenum
cover/grille panel.
The two fluidic washer nozzles are not adjustable. The nozzles and hose fittings cannot be repaired and, if faulty or damaged, they must be
replaced.
