RAM 1500 Truck 4WD V6-3.7L VIN K (2002)
14. Verify that all plated links are aligned with the marks on all sprockets and the "W" marks on camshaft sprockets are at the 12 o'clock position.
CAUTION: Ensure the plate between the left secondary chain tensioner and block is correctly installed.
15. Install both secondary chain tensioners. Tighten bolts to 28 Nm (250 inch lbs.).
NOTE: Left and right secondary chain tensioners are not common.
16. Remove all locking pins (3) from tensioners.
CAUTION: After pulling locking pins out of each tensioner, DO NOT manually extend the tensioner(s) ratchet. Doing so will over tension the
chains, resulting in noise and/or high timing chain loads.