RAM 1500 Truck 4WD V8-4.7L (2008)
Front Door Panel: Service and Repair
Front Door Waterdam
Removal
REMOVAL
1. Remove the interior door handle actuator See: Front Door Handle/Front Door Interior Handle/Service and Repair/Removal .
2. Remove the speaker See: Accessories and Optional Equipment/Radio, Stereo, and Compact Disc/Speaker/Service and Repair/Removal .
CAUTION: Do not allow the water dam adhesive to become contaminated with dirt or other foreign substances. If the water dam
becomes contaminated or damaged, replace it.
3. Carefully remove the water dam (1) from around the perimeter of the door (2).
4. Separate the water dam from the interior handle actuator rod and the door wire harness (if equipped) and remove the water dam.
Installation
INSTALLATION
CAUTION: Do not allow the water dam or adhesive to become contaminated with dirt or other foreign substances. If the water dam becomes
contaminated or damaged, replace it.
NOTE: Be sure that the water dam is fully sealed around the perimeter of the door.
1. Position the interior handle actuator rod and the wire harness (if equipped) through the holes in the water dam (1) and install the water dam to the
door (2).
2. Install the speaker See: Accessories and Optional Equipment/Radio, Stereo, and Compact Disc/Speaker/Service and Repair/Installation
3. Install the interior door handle actuator See: Front Door Handle/Front Door Interior Handle/Service and Repair/Installation .