RAM 1500 Truck 4WD V8-4.7L (2008)
Front Door Striker: Adjustments
ADJUSTMENTS
1. Using a grease pencil or equivalent, mark the location of the door latch striker (1) on the B-pillar (2) to aid in adjustment.
2. Loosen the two bolts (3) that secure the door latch striker to the B-pillar.
3. To adjust the rear gap and flush measurement, change the position of the door latch striker and then tighten the two bolts to 28 Nm (21 ft. lbs.) .
4. Verify correct door and latch position.
