dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Headliner - Removal|Page 13609 > < Glove Box Door Latch - Removal|Page 13604
Page 1
background image

Headliner: Service and Repair
Headliner - Removal

REMOVAL

NOTE: Headliner for Quad Cab model shown. Regular cab similar.

1. On Mega Cab models, remove the front seats,  See: Seats/Service and Repair/Seat - Removal .
2. Remove the A-pillar trim panels  See: Passenger Assist Handle/Service and Repair/A-Pillar Trim/Grab Handle/Removal .
3. Remove the upper B-pillar trim panels  See: Trim Panel/Service and Repair/Pillar Trim/B-Pillar Trim .
4. On Quad Cab models, remove the upper C-pillar trim panels  See: Trim Panel/Service and Repair/Pillar Trim/C-Pillar Trim Panel-Removal .
5. Disconnect the wire harness connector (1) located at the left A-pillar from the headliner wire harness (2).
6. Disconnect the headliner wire harness connector (3) from the inside rear view mirror.
7. Remove the overhead console  See: Console/Service and Repair/Overhead Console/Removal .
8. Remove the sun visors (4)  See: Sun Visor/Service and Repair/Sun Visor - Removal .
9. Remove the sun visor supports (5)  See: Sun Visor/Service and Repair/Sun Visor Support - Removal .

10. Remove the dome lamp (6)  See: Lighting and Horns/Dome Lamp/Service and Repair/Dome Lamp - Removal .
11. Remove the two coat hooks (7)  See: Trim Panel/Service and Repair/Coat Hook - Removal .
12. Lower the rear of the headliner (9) downward from the roof panel (10) and disconnect the headliner wire harness connector (8) from the center

high mounted stop lamp.

13. Lower the front of the headliner downward and remove the headliner through the passenger door opening.

Headliner - Removal|Page 13609 > < Glove Box Door Latch - Removal|Page 13604