RAM 1500 Truck 4WD V8-4.7L (2008)
Brake Caliper: Removal and Replacement
Rear
REAR
CAUTION: Never allow the disc brake caliper to hang from the brake hose. Damage to the brake hose will result. Provide a suitable support to
hang the caliper securely.
1. Raise and support vehicle.
2. Remove the wheel and tire assembly.
3. Drain small amount of fluid from master cylinder brake reservoir with suction gun.
4. Remove the brake hose banjo bolt and discard the copper washers if replacing caliper.
5. Remove the caliper slide bolts (3).
6. Remove the caliper (6) from vehicle.
Front - 1500
FRONT - 1500
CAUTION: Never allow the disc brake caliper to hang from the brake hose. Damage to the brake hose with result. Provide a suitable support
to hang the caliper securely.
1. Raise and support the vehicle.
2. Remove the tire and wheel assembly.
3. Compress the disc brake caliper (6).
4. Remove the banjo bolt (4) and discard the copper washers.